# The display is not working

**URL:** <https://discuss.vecros.com/t/the-display-is-not-working/241>\
**Category:** JETCORE || Jetson Carrier Board\
**Tags:** review\
**Created:** [November 12, 2025, 6:55am UTC](https://discuss.vecros.com/t/the-display-is-not-working/241 "2025-11-12T06:55:43Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pranav301102](https://discuss.vecros.com/letter_avatar_proxy/v4/letter/p/cdc98d/32.png) [@Pranav301102](https://discuss.vecros.com/u/Pranav301102)\
**Post date:** [November 12, 2025, 6:55am UTC](https://discuss.vecros.com/t/the-display-is-not-working/241/1 "2025-11-12T06:55:43Z")

</div>

i was working with thee jetcore carrier board along with jetson orin nx 16gb module. But after flashing the display is not showing up and the monitor’s going to standby mode when the kit powered on. Any fix on this issue?

---

<div class="post-metadata">

**Author:** ![Bibhu\_panda](https://discuss.vecros.com/letter_avatar_proxy/v4/letter/b/ecd19e/32.png) [@Bibhu\_panda](https://discuss.vecros.com/u/Bibhu_panda)\
**Post date:** [November 12, 2025, 10:54am UTC](https://discuss.vecros.com/t/the-display-is-not-working/241/2 "2025-11-12T10:54:22Z")

</div>

Some HDMI-only monitors may not display output due to differences in signal handling. Share us the make and model type of monitor. Also please check with a monitor with DP port.

---

<div class="post-metadata">

**Author:** ![SIBYSAGAR](https://discuss.vecros.com/letter_avatar_proxy/v4/letter/s/c77e96/32.png) [@SIBYSAGAR](https://discuss.vecros.com/u/SIBYSAGAR)\
**Post date:** [November 14, 2025, 4:38pm UTC](https://discuss.vecros.com/t/the-display-is-not-working/241/3 "2025-11-14T16:38:38Z")

</div>

Hi Pranav,

We also faced the same issue, but the problem was solved by vecros. They recommeded to use Monitors which has both hdmi and DP port in it. It worked. Try this

---

<div class="post-metadata">

**Author:** ![vecros\_developer](https://discuss.vecros.com/user_avatar/discuss.vecros.com/vecros_developer/32/1_2.png) [@vecros\_developer](https://discuss.vecros.com/u/vecros_developer)\
**Post date:** [November 17, 2025, 2:33pm UTC](https://discuss.vecros.com/t/the-display-is-not-working/241/4 "2025-11-17T14:33:46Z")

</div>

Hi SibySagar,

thanks for the mention. can you put list of monitors you tried and worked.

it will help others as well

---

<div class="post-metadata">

**Author:** ![SIBYSAGAR](https://discuss.vecros.com/letter_avatar_proxy/v4/letter/s/c77e96/32.png) [@SIBYSAGAR](https://discuss.vecros.com/u/SIBYSAGAR)\
**Post date:** [November 20, 2025, 8:43am UTC](https://discuss.vecros.com/t/the-display-is-not-working/241/5 "2025-11-20T08:43:48Z")

</div>

I couldn’t find out the model as the label has been scratched out. But we have used DELL monitor